Adhesives and Sealants.com Home Page

ProSys Innovative Packaging Equipment, Filling Equipment

Thu, 29 Jul 2004 20:00:00 GMT

ProSys, a division of Reagent Chemical & Research Incorporated, is a Premier manufacturer of manual, semiautomatic, and fully automatic equipment for filling cartridges, squeeze tubes, syringes and rigid containers for the Cosmetic, Pharmaceutical, Chemical, Adhesive and Sealant Industries...

RS 8 Series Automatic Syringe Filling Equipment

Mon, 03 May 2004 19:30:00 GMT

The RS 8 Series syringe fillers are designed and built specifically with Dual Barrel containers in mind. All ProSys syringe fillers utilize positive displacement metering & field proven components for accurate, reliable operation at speeds of 15 to 65 per minute...

White Paper: Is Your ERP System Built For Your Industry? It Makes A Difference

Fri, 22 May 2009 04:37:00 GMT

This white paper discusses the manufacturing element of enterprise resource planning (ERP). Most ERP solutions target either the process or discrete sector, and a few, like Microsoft Dynamics AX, straddle both. By Fullscope

Brochure: Arizona Instrument General Lab Services

Wed, 13 May 2009 07:08:00 GMT

At Arizona Instrument LLC the testing lab is kept busy, very busy. Arizona Instrument LLC is the manufacturer of the Computrac® line of moisture analyzers. These instruments are the leaders in easy to use moisture/solids/ash analysis and are utilized in a variety of different industries.

New Loctite Threadlockers Withstand High Temperatures And Cure Without Cleaning Or Priming

Fri, 05 Mar 2010 10:12:00 GMT

Henkel Corporation has introduced two new Loctite threadlockers formulated to withstand consistent operating temperatures up to 360�F. Curing consistently and thoroughly without cleaning, these new products tolerate the oils and lubricants typically found on "as received" threaded fasteners

Long-life, High-Intensity LED Flood System For UV/Visible Light Cure Adhesives

Thu, 04 Mar 2010 10:08:00 GMT

Henkel Corporation has introduced the Loctite LED Flood System, a self-contained, air-cooled assembly designed to cure Loctite UV/Visible cure adhesives. The system delivers a curing area of 100 x 100 mm at intensities of up to 600 mW/cm2, depending on the wavelength selected

Nordson MiniBlue II Applicators Exceed Operating Life Of Pneumatic Hot Melt Packaging Applicators By More Than 2X

Mon, 01 Mar 2010 14:15:00 GMT

Nordson Corporation has introduced a new series of high speed, hot melt adhesive dispensing applicators, called MiniBlue II, that provide unmatched service life, resulting in greater productivity, less maintenance and reduced downtime in packaging operations

Free Hot Water Selected As U.S. Supplier Of Weicon Products

Sat, 06 Feb 2010 08:33:00 GMT

M�nster, Germany-based Weicon Inc. selected Free Hot Water as an exclusive representative for their products throughout the United States. Weicon currently exports to 71 countries worldwide

Schreiner ProTech Introduces New, Intelligent Pressure Compensation Seal For The Solar Industry

Thu, 04 Feb 2010 20:37:00 GMT

Schreiner ProTech today announced the introduction of an innovative, rugged, self-adhesive Pressure Compensation Seal (PCS) specially designed to provide solar module junction boxes with long-lasting protection against severe environmental conditions, preventing damage to sensitive electrical components

RASIRC Granted Patent For Specialty Seal In Ultrapure Environment

Thu, 25 Feb 2010 12:00:00 GMT

RASIRC, the steam purification company, announced today that the US Patent and Trademark Office has granted Patent #7,625,015B2for a novel adhesive and weld-free assembly technique for working with hollow fibers and ultrapure materials

Low To Moderate Viscosity, Toughened Two Component Epoxy System For High Performance Casting, Bonding And Sealing

Thu, 25 Feb 2010 05:38:00 GMT

Master Bond EP21FL is a two part epoxy resin system that features low to moderate viscosity. It is well suited for potting, coating and sealing electronic assemblies and excels at bonding dissimilar substrates with different coefficients of expansion. This high performance adhesive has a wide service temperature range of -60�F to +250�F

New Low Cost, High Performance Plural Component Air, Manual And Spray Guns

Wed, 24 Feb 2010 08:23:00 GMT

Plas-Pak Industries announces the availability of a newly designed line of plural component, manual, air and high solids spray dispensing guns for its patented Ratio-Pak� two part cartridges and HSS spray systems and technologies

Defense Appropriations Funding Will Advance STB®'s Development Of Lifesaving Dressing

Tue, 23 Feb 2010 05:39:00 GMT

STB Lifesaving Technologies� announced today $2.4 million was included in the FY2010 U.S. Department of Defense appropriations bill to advance the development of the Fibrin Adhesive STat (FAST�) dressing

Video: ProTrac Tube Filling

Fri, 20 Feb 2009 18:45:00 GMT

The High-Speed ProTrac (PT), Series can be configured with multiple heads and full line integration for the needs of continuous, multi-shift, high-output production requirements.

Sashco Sealants Introduces New eXact Color™ Sealant

Fri, 19 Feb 2010 08:40:00 GMT

Sashco Sealants, manufacturer of high-performance caulks and sealants, introduces eXact ColorT Sealant, the newest addition to their product line. eXact ColorT Sealant offers a new, convenient way to create custom color caulk

CPI Accepting Papers And Posters For The Polyurethanes 2010 Technical Conference

Thu, 18 Feb 2010 09:53:00 GMT

The Center for the Polyurethanes Industry (CPI), of the American Chemistry Council, has issued a call for papers and posters to be presented at the Polyurethanes 2010 Technical Conference.

New Safety Bath And Sill Mats Help Prevent Slip And Fall In Bathrooms - From Martinson-Nicholls

Thu, 18 Feb 2010 08:28:00 GMT

Using 3M Pressure Sensitive Safety WalkT, Martinson-Nicholls has come up with new companion Safety Bath and Sill Mats, a versatile slip-resistant system to help control slip and fall in your bathroom and shower areas. Applicable for both commercial and residential customers, these anti-slip mats can be used on floors, tubs and showers

Homax Introduces SPRAY & SET Wall Tile Adhesive

Tue, 02 Feb 2010 04:06:25 GMT

Homax brand, the leader in DIY home repair aerosol spray textures, recently announced the breakthrough introduction of SPRAY & SET, a powerful new professional-grade adhesive for applying wall tiles on backsplashes and other decorative applications

Datasheet: ProTrac 140/220 Fill Station

Wed, 09 Dec 2009 16:20:00 GMT

The ProTrac 140 and 220's SERVO Driven Fill Station provides push button control and setup recall for all fill station adjustments.

Hydrogen Sulfide Monitoring System: Jerome® 651

Tue, 30 Dec 2008 07:17:00 GMT

The Jerome® 651 monitoring system from Arizona Instrument is the tool you need to solve your hydrogen sulfide emission problems. Designed to provide long-term monitoring even in extreme weather conditions, it can be stationed at any location that requires monitoring. Multiple units can also be linked to form a perimeter monitoring system. Built-in software, data logging and radio telemetry capabilities make downloading data convenient and easy.

Brochure: Computrac Vapor Pro Rx Moisture Analyzer

Tue, 30 Dec 2008 16:17:00 GMT

Computrac Vapor Pro Rx Moisture Analyzer designed to Test Lyophilized Materials.

Brochure: Computrac Vapor Pro Moisture Analyzer

Tue, 30 Dec 2008 16:17:00 GMT

Computrac Vapor Pro analyzers, utilizing a moisture-specific sensor and patented, sealed flow-path, detect moisture levels as low as 10 ppm in as few as five minutes without the use or recurring costs of harmful reagents, chemicals, or glassware.

Brochure: Computrac Vapor Pro Fx Moisture Analyzer

Tue, 30 Dec 2008 16:17:00 GMT

Computrac® Vapor Pro® Fx Moisture Analyzer testing Your Oils Will Never Be the Same

Manual: Jerome 471 Mercury Vapor Analyzer

Tue, 30 Dec 2008 16:09:00 GMT

The Jerome® 471 mercury vapor analyzer is capable of detecting accurately down to 0.030 �g/m3, utilizing the UV Atomic Absorption spectrometry method of mercury vapor assessment. Accuracies are maintained by means of an internal reference cell. Interferences common in other technologies are greatly reduced due to the absorption specificity of the mercury atom.

Brochure: Jerome 471 Mercury Vapor Analyzer

Tue, 30 Dec 2008 16:09:00 GMT

Manual: Jerome J405 Portable Mercury Vapor Monitor

Tue, 30 Dec 2008 16:01:00 GMT

The Jerome® J405 portable mercury vapor monitor is redefining the portable mercury vapor analyzer market. Significant performance enhancements and modern communications capabilities have been combined to create a new option for mercury spill detection and cleanup analysis.

Brochure: Jerome J405 Portable Mercury Vapor Monitor

Tue, 30 Dec 2008 16:01:00 GMT

Manual: Computrac MAX 2000XL Moisture/Solids Analyzer

Tue, 30 Dec 2008 15:53:00 GMT

Computrac® MAX® 2000XL Moisture/Solids Analyzer Features, Optional bi-directional communication package for data storage and retrieval from PC and easy programming of multiple instruments.

Datasheet: Computrac MAX 2000XL Moisture/Solids Analyzer

Tue, 30 Dec 2008 15:53:00 GMT

Computrac® MAX® 2000XL, Programmable High Performance Moisture Analyzer.

Manual: Jerome 631 Hydrogen Sulfide Analyzer

Tue, 30 Dec 2008 15:39:00 GMT

The Jerome® 631-X utilizes a patented gold film sensor. The instrument's selectivity to hydrogen sulfide eliminates interferences from sulfur dioxide, carbon dioxide, carbon monoxide, and water vapors. When the sample button is pressed, an internal pump draws air into the instrument. Any hydrogen sulfide in the sample is absorbed by the sensor which registers a proportional change in electrical resistance. The hydrogen sulfide concentration is displayed on the LCD, where it remains until the next sample is taken.

Brochure: Jerome 631 Hydrogen Sulfide Analyzer

Tue, 30 Dec 2008 15:39:00 GMT

Datasheet: Computrac MAX 5000XL Moisture Analyzer

Tue, 30 Dec 2008 15:32:00 GMT

Computrac MAX 5000XL, Programmable High Performance Moisture/Solids/Ash Analyzer.

White Paper: Overview Of Mixing Technologies For The Production Of Low To High Viscosity Adhesive Applications

Fri, 04 Dec 2009 04:10:00 GMT

This article seeks to provide an overview of effective and updated mixing technologies being implemented across many of today's competitive adhesives manufacturing plants, as well as new equipment designs increasingly being recognized by the industry as potential solutions to prevailing mixing challenges. By Charles Ross

Arizona Instrument LLC - Computrac� precision moisture analysis instruments

Mon, 29 Dec 2008 20:36:51 GMT

Arizona Instrument is an ISO 9001:2000 registered company that designs, manufactures, and markets Computrac� precision moisture analysis instruments and portable and fixed Jerome� toxic gas analyzers used in research and development, quality control, and process control applications.

Brochure: ProSys Model HP 55A Drum Press

Fri, 08 Jan 2010 16:29:00 GMT

The ProSys Model HP 55A is for feeding product to any filler from 55-gallon drums. The hydraulic power supply uses an integrated, air-cooled radiator. Product changeovers are greatly improved with the ProSys hose liner system.

Brochure: Computrac® MAX® 4000 Moisture/Solids Analyzer

Mon, 05 Jan 2009 21:03:00 GMT

The Computrac� MAX� 4000 moisture/solids analyzer provides the same reliability and ruggedness as the MAX� 2000XL, but with 25% faster throughput!

Brochure: Jerome 860 Hydrogen Sulfide Monitor

Fri, 30 Jan 2009 13:45:00 GMT

The Jerome 860 hydrogen sulfide monitor is designed to continually monitor and record hydrogen sulfide concentrations in remote locations. The instrument provides automatic, unattended, long-term monitoring of hydrogen sulfide gases in contained or hard to reach areas. The compact, battery powered monitor is portable, water resistant and intrinsically safe.

Dorf Ketal Acquires Specialty Catalysts Business From DuPont Chemicals And Fluoroproducts

Thu, 28 Jan 2010 08:44:00 GMT

Dorf Ketal Chemicals (India) Pvt Ltd, a leading specialty chemicals company headquartered in Mumbai, India, with facilities in Stafford, Texas, has acquired the Specialty Catalysts Business of DuPont Chemicals and Fluoroproducts through a new LLC company in the USA with immediate effect

Introducing The MatrX™ Line Of Adhesive Products From Glue Dots International

Thu, 21 Jan 2010 08:36:00 GMT

Available February 2010: Glue Dots International, the manufacturer of innovative Glue Dots� Brand Adhesive Products, will be unveiling a revolutionary new product called MatrXT in booth 5425 at West Pack 2010. Designed for use in industrial packaging applications, this new technology, consisting of a pattern of adhesive micro-dots, comes in widths of �" and �" and in thicknesses from 5 mils up to 15 mils

ARclad Heat-Activated Splicing Tapes Offer New Choices For Bonding Specialty Papers, Heavyweight And Challenging Materials

Wed, 20 Jan 2010 11:02:00 GMT

Adhesives Research, a leading developer and manufacturer of custom pressure-sensitive adhesive tapes (PSAs), specialty coatings, films and laminates, now offers three heat-activated tapes, ARclad 7970LC, ARclad 7970 and ARclad 6194, as new alternatives for splicing specialty paper and heavyweight materials that are not typically spliced with PSA tapes

Pregis Announces Absolute Flooring Underlayment Licensees; Defends Patents

Wed, 20 Jan 2010 09:00:00 GMT

MP Global Products, Norfolk, Neb., recently joined the ranks of companies approved to market and distribute Pregis Corporation's patented line of Absolute flooring products

Franklin Guangzhou Launches Informative Web Site For Wood Products Manufacturers And Fiberglass Makers In China And The Pacific Rim

Wed, 20 Jan 2010 08:29:00 GMT

Franklin Guangzhou Adhesives Company, Ltd, a wholly owned foreign enterprise (WOFE) of U.S.-based Franklin International, has launched a new Web site, www.FranklinAdhesivesChina.com, to provide customers in China and the Pacific Rim practical information on selection and proper application of both its broad line of wood adhesives for assembly of furniture, millwork and laminated goods and its line of specialty polymers for use in the manufacture of fiberglass

ProGEL Lung Surgery Device Gets FDA Approval

Tue, 19 Jan 2010 13:00:00 GMT

Neomend, Inc., an innovator in sealant and adhesion-prevention products for the surgical marketplace, announced it has received premarket approval from the U.S. Food and Drug Administration (FDA) for the company's ProGEL Pleural Air Leak Sealant

MOCON Creates International Webinar Series; Tutorials Conducted In English, Spanish, Chinese

Tue, 19 Jan 2010 10:37:00 GMT

MOCON, Inc. is making its free popular educational webinars on package testing accessible to an even larger global audience by offering online classes in Spanish, Chinese and English