Adhesives and Sealants.com Downloads

3M™ Betapure™ AU Series Filter Cartridges And Capsules Datasheet

Thu, 02 Feb 2012 08:34:00 GMT

Betapure™ AU series filter cartridges and capsules set the standard for filtration performance.

3M™ DF Series Filter Systems Datasheet

Thu, 02 Feb 2012 08:03:00 GMT

The 3M™ DF series filter system is an advanced proven alternative to the use of standard bag filters.

3M™ Series NB Filter Bags Datasheet

Thu, 02 Feb 2012 05:01:00 GMT

3M™ series NB Nylon Monofilament (NMO) filter bags are produced using manufacturing processes that result in highly reliable filters with predictable and repeatable performance.

CUNO CTG-Klean System Brochure

Wed, 01 Feb 2012 04:06:00 GMT

The CUNO™ CTG-Klean system is a totally enclosed filtration system that uses a separate pressure vessel and disposable filter pack to isolate the product to be filtered from the housing.

Micro-Klean™ RB Series Cartridges Datasheet

Tue, 31 Jan 2012 04:56:00 GMT

The Micro-Klean™ RB Series Cartridge manufacturing process produces a rigid, resin bonded, graded porosity structure that reduces by-pass and avoids the unloading characteristics of soft and easily deformable competitive meltblown and stringwound filter cartridges.

Application Note: Starch

Fri, 22 Apr 2011 10:30:00 GMT

The SSB (Starch System Brookfield) monitors the viscosity of starches during automated quick-cook (gelatinization) and fast cool-down of starch samples.

Application Note: Flooring Adhesives

Fri, 22 Apr 2011 10:26:00 GMT

Heavy flooring adhesives generally produce high variable and time-consuming viscosity testing results when tested with standard viscometers and accessories. However, the R/S+SST in a yield test with modulus calculation quickly qualifies the product with consistently reproducible results, thereby providing an improved QC procedure.

Application Note: Curling/Gelling Materials

Fri, 22 Apr 2011 10:17:00 GMT

The Cure Mode algorithm was developed in response to customer concerns that (1) their gel timers did not provide them with any viscosity or rheological data, and (2) they could not afford expensive rheometers that would monitor gelation or "curing" of materials such as epoxies, for example.

Article: Simplified Method Of Measuring Tack Of Pressure Sensitive Adhesives

Fri, 22 Apr 2011 09:55:00 GMT

The procedure for measuring tack of pressure sensitive adhesives is fully described in some ASTM methods.

Brochure: CT3 Texture Analyzer

Fri, 22 Apr 2011 07:50:00 GMT

The CT3 is a low cost, but powerful, universal testing machine that offers both compression and tensile testing. It can calculate, through compression and tensile data, a number of physical properties that have proven to be highly correlated to human sensory evaluation of food and other consumer products.

Technical Brief: Hybrid Planetary Mixers Produce High Viscosity Mixtures With Ultra-Fine Dispersion Quality

Fri, 15 Apr 2011 06:02:00 GMT

Hybrid planetary mixers are utilized for creating fine dispersions in viscous mixtures, typically within the viscosity range of 100,000 to 2 million cP. By Charles Ross and Son Company

Technical Brief: Mixing High Solids Formulations

Fri, 15 Apr 2011 05:46:00 GMT

Mixer selection for high solids formulations depends on viscosity rather than percent solids. Regardless of solids concentration, low-viscosity mixtures can be prepared in single-shaft rotor/stator mixers or high-speed dispersers. By Charles Ross and Son Company

Tech Brief: Electronic Variable Speed Promotes Processing Flexibility In Ribbon Blenders - From Soft Start To Discharge

Tue, 05 Apr 2011 04:53:00 GMT

Over the years, many ribbon blenders were built without any provision for starting at slow speed. Unfortunately, a dead load start presents many disadvantages, all of which increase costs. The buyer must choose between using an over-sized drive train that is capable of delivering the peak horsepower needed to get the batch moving or a lower torque drive train that is appropriate for powering the blender once it is running but overloaded when starting. By Charles Ross and Son Company

Tech Brief: Ultra-High Shear Mixers Increase Overall Throughput And Efficiency Of Homogenization Processes

Wed, 05 Jan 2011 08:53:00 GMT

Several types of mixing systems are utilized for combining raw materials into a pre-mix. There are gentle agitation devices such as low speed propellers, turbines or paddle agitators. Better quality pre-mixes are achieved through the use of high speed devices like open-disc saw-tooth blades and high shear rotor/stator mixers. By Charles Ross and Son Company

Tech Brief: Apply High Speed Powder Induction To Eliminate Dusting In The Mixing Area

Wed, 05 Jan 2011 03:59:00 GMT

When poured from one open vessel into another, lightweight solids easily become airborne and can require extensive clean up. The most serious concern however is the impact of dusting on plant safety. By Charles Ross and Son Company

Tech Brief: Run Your Rotor/Stator Mixer At Maximum Speed To Optimize Particle Size Reduction

Wed, 05 Jan 2011 03:48:00 GMT

High shear mixers feature a four-blade rotor running at tip speeds in the range of 3,000-4,000 feet/min within a close tolerance fixed stator. Running the rotor at a particular tip speed yields a corresponding equilibrium, which can be represented through the size distribution of a dispersion or emulsion. By Charles Ross and Son Company

Datasheet: Jerome® J605 Hydrogen Sulfide Analyzer

Wed, 09 Jun 2010 04:01:00 GMT

This next-generation of the renowned Jerome® family of vapor analyzers from Arizona Instrument maintains all the features, reliability, and simplicity that have established Jerome® as an industry leader in the hydrogen sulfide and mercury vapor gas detection markets for more than 20 years.

Article: Packaging Materials And Viscosity

Tue, 30 Mar 2010 05:39:00 GMT

What does packaging have to do with viscosity? Quality Managers worry about their food products and measure viscosity to ensure proper flow behav�ior, such as with sauces and dressings. By Robert G. McGregor, Sales Marketing Manager, Brookfield Engineering Laboratories, Inc.

Brochure: Hydrogen Sulfide Analyzer: Jerome® J605

Wed, 17 Mar 2010 04:53:00 GMT

This next-generation of the renowned Jerome® family of vapor analyzers maintains all the features, reliability, and simplicity that have established Jerome as an industry leader in the hydrogen sulfide and mercury vapor gas detection markets for more than 20 years.

Product Overview: ProSys MTS Tube Filler

Fri, 12 Mar 2010 13:54:00 GMT

The ProSys MTS series is a state-of-the-art, semi-automatic squeeze tube filling and closing system. Designed for short-run and low-volume tube-filling applications, it produces up to 25 finished tubes per minute.