Silicone DissolverSource: Amtex Chemical Co.
- Flash point: 160°F
- Vapor pressure: 0.70 mmHg at 20°C
- Density: 7.75 ± .2 lbs./gallon
The solvent can be used at room temperature for most applications. If removal time is short, the solution can be agitated and/or warmed to 110°F to speed its action. It can also be used in ultrasonic applications.
For cured resins, a time period of from 1-8 hours is required to solubilize the resin, depending on resin type and thickness.
After resin is solubilized, rinse well with Amtex-Rinse or water to remove any residue from the silicone or the CCR.
Amtex Chemical Company, 890 Fern Hill Rd., West Chester, PA 19380. Tel: 800-56-AMTEX. Fax: 610-436-5173.