Product/Service

3100 Max Floor Covering Adhesive

Source: Q.E.P. Co., Inc.
ENVIRONMENTALLY SAFE, ZERO VOC Calculated/SOLVENT FREE, ECONOMICAL QUALITY FORMULA
  • ENVIRONMENTALLY SAFE, ZERO VOC Calculated/SOLVENT FREE, ECONOMICAL QUALITY FORMULA
  • AIR QUALITY: MEETS THE CARPET & RUG INSTITUTE'S LOW VOC EMISSION CRITERIA

  • DESIGNED FOR APPLICATION IN RESIDENTIAL & LIGHT COMMERCIAL TRAFFIC

  • VERY LOW ODOR WET/ODORLESS WHEN DRY!

  • FREEZE-THAW STABLE

  • CRI APPROVAL #AA-936471

USES OF 3100 FLOOR COVERING ADHESIVE:

This adhesive is designed to adhere to felt-backed sheet goods, unfinished sheet cork underlayment, latex foam back, needle-punched, jute and polypropylene secondary (Action-Bac®, AdBac®) backed carpets. This adhesive may be used over plywood of underlayment quality, terrazzo, marble, sound resilient floors which free of wax and embossing and concrete above, on or below grade. Not recommended for vinyl or other products or surfaces other than listed above.

Given the propensity of some felt-backed sheetgoods to discolor a specifically designed adhesive, such as Roberts 2001, is recommended for warranty purposes.

COVERAGE:

Floorcovering type Notch Size Approx.Coverage

Sheetgoods, needle punch, 1/16x1/16x1/16 V-notch 18-20 sq.yds./gal.

162-180 sq.ft./gal.

Texture-backed carpets 1/8x1/16x1/8 V-notch 10-12 sq.yds./gal.

(Action-Bac®, AdBac®, 90-108 sq.ft./gal.

cork underlayment)

*The above trowel notch recommendations are merely suggestions and a starting point. Surface conditions and roughness of material backing will ultimately determine the coverage needed. It is the installers responsibility to insure 100% transfer of adhesive to the material backing, including recessed areas. Full coverage of the floor surface is also necessary.

Q.E.P. Co., Inc., 1081 Holland Drive, Boca Raton, FL 33487. Tel: 561-994-5550; Fax: 561-241-2830.