Product/Service

Hydrogen Sulfide Analyzer: Jerome® 631

Source: Arizona Instrument LLC

Hydrogen Sulfide Analyzer: Jerome® 631
The Jerome® 631-X utilizes a patented gold film sensor. The instrument's selectivity to hydrogen sulfide eliminates interferences from sulfur dioxide, carbon dioxide, carbon monoxide, and water vapors. When the sample button is pressed, an internal pump draws air into the instrument. Any hydrogen sulfide in the sample is absorbed by the sensor which registers a proportional change in electrical resistance. The hydrogen sulfide concentration is displayed on the LCD, where it remains until the next sample is taken.

Click Here To Download:
Manual: Jerome 631 Hydrogen Sulfide Analyzer
Brochure: Jerome 631 Hydrogen Sulfide Analyzer

With the push of a single button, the portable Jerome® 631-X hydrogen sulfide analyzer displays low-level concentrations in just seconds. It offers an analysis range of 0.003-50 ppm for odor and corrosion control, safety, and leak detection in such industries as wastewater treatment, oil and gas, pulp and paper, and farming. This simple-to-use instrument weighs only 7 pounds, utilizes an internal rechargeable battery pack or AC power, and is easily carried to suspected sources of hydrogen sulfide for detection and measurement. Locked in survey mode, the 631-X automatically displays hydrogen sulfide concentrations as quickly as every 3 seconds.

The Jerome® 631-X utilizes a patented gold film sensor. The instrument's selectivity to hydrogen sulfide eliminates interferences from sulfur dioxide, carbon dioxide, carbon monoxide, and water vapors. When the sample button is pressed, an internal pump draws air into the instrument. Any hydrogen sulfide in the sample is absorbed by the sensor which registers a proportional change in electrical resistance. The hydrogen sulfide concentration is displayed on the LCD, where it remains until the next sample is taken.

Additional accessories are available to customize the Jerome® 631-X to meet individual application needs. For unattended sampling, the instrument can be programmed by a computer using the Jerome® Communication Software (JCS). A data logger plugs into the back of the instrument for data acquisition during portable surveys or unattended sampling without a computer. Recorded data can be downloaded later to a computer using the JCS software for analysis, printout, and permanent record keeping.

Click Here To Download:
Manual: Jerome 631 Hydrogen Sulfide Analyzer
Brochure: Jerome 631 Hydrogen Sulfide Analyzer