Automatic Meter, Mix and Dispense System

The 2500 Series Single-Acting Automatic Meter, Mix and Dispense System if for production potting, encapsulating, molding, or central filling of two-part reactive formulations with abrasive fillers which settle out of suspension.

Standard Features

• Positive-displacement piston metering with positive-ported, 3-way-flow directional valves (NOT check valves) maintains very accurate ratio.
• In-line metering design prevents side-loading when handling wide ratio formulations.
• Single-acting design allows filled materials to be returned to their agitated containers to prevent settling and damage to the metering system.
• No-purge mix/dispense assembly with adjustable valving provides air-free dispensing.
• Abrasion-resistant metering cylinder, seals, and hardware.

Options

• Heating of individual materials or the entire system.
• Wide range of ASME rated vacuum/pressure tanks with or without material agitators.
• Heavy plated cylinders for extreme duty.
• Low level indicators with audio/visual alarm.
• Pot-life timer with alarm and auto-shot feature.
• Methods of shot control: operator, time or volumetric.

System Specifications

• Ratio range: 1:1- 20:1
• Ratio accuracy: ± 1%
• Viscosity range: 1 cps- 500,000 cps (Some materials may require heating or pumping)
• Sure shot range: 1/10 cc- 760 cc (depending on ratio)

Ashby Cross Company, Inc., 28 Parker St., Newburyport, MA 01950. Tel: 978-463-0202. Fax: 978-463-0505.