Product/Service

G-2304

Source: Dural, Div. Of Multibond, Inc.
G-2304 is a pre-catalyzed cross-linkable vinyl copolymer emulsion designed for high quality woodworking
PRODUCT TYPE:
    G-2304 is a pre-catalyzed cross-linkable vinyl copolymer emulsion designed for high quality woodworking. Forms water resistant bonds. This product meets CSA 0112,8 M 1977 Type II Standard.

PHYSICAL PROPERTIES:
    Appearance White liquid
    Viscosity 2700 - 2800 cPs
    Solids 49 + 1%
    Specific Gravity: 1.10 ± 0.01
    pH: min. 4.5

SUGGESTED USES:
    Finger jointing, assembly, lamination, G-2304 can be cold pressed, hot pressed or high frequency cured.

OPERATING CONDITIONS:
    Application: Squeeze bottle, roller, trowel, air gun, mechanical roller, automatic dowelling machine.

    Assembly time:

      Open: 0 - 5 minutes
      Closed: 0 - 7 minutes

    Press Time: 30 minutes @ 50 - 150 PSI/ 2-3 minutes @ 300EF/ 149EC

    Machining: Light to moderate machining 60 minutes after press time.


SHELF LIFE:
    Adhesive should be consumed within three (3) months.

PRECAUTIONS:
    Keep container closed. Avoid contamination. Rotate adhesive stock. Prevent from freezing.

Our personnel are available to purchasers to obtain best results from our products, and recommendations are based on tests and information believed to be reliable. However, since we have no control over the conditions under which our products are transported to, stored, handled, or used by purchasers, all recommendations and sales aremade on condition that we will not be held liable for any damages resulting from their use. No representative of ours has any authority to waive to change this provision.

Dural, Div. Of Multibond, Inc., 550 Marshall Ave., Dorval, PQ H9P 1C9. Tel: 514-636-6230; Fax: 514-631-7737.