Product/Service

Shot Meter

Source: Intelligent Dispensing Systems, Inc.
The 8000 series of pneumatic dispensers offers the flexibility and versatility of pneumatics while greatly reducing production costs.
The 8000 series of pneumatic dispensers offers the flexibility and versatility of pneumatics while greatly reducing production costs. The series includes three distinct versions: the 8300 Shot Meter, the 8400 Valve Controller, and the 8500 Pick and Place.

The 8300 Shot Meter dispenses a variety of fluids from watery adhesives to solder paste. Capable of controlled pressures from 0 to 30 PSI or 0 to 100 PSI, the 8300 is ideal for most basic dispensing needs. The system provides both timed and manual settings, allowing the operator to choose, depending upon the application.

The 8400 Valve Controller combines the dispensing quality and control of the 8300 with the convenience and versatility of an "air-open, air-close" dispense valve. Equipped with two pneumatic ports, the 8400 uses one line to open the valve, and the other to close the valve.

A variety of different valves are available, including high-pressure stainless steel, spray, metering, and servo valves. A second version of the 8400 ¾ the 8400/2 ¾ permits two syringes to dispense simultaneously.

The 8500 Pick and Place dispenser combines the benefits of the 8300 and the 8400 while adding a vacuum port and pick-up pen for hands-free component placement. This all-in-one system is ideal for surface mount device repair or prototyping, incorporating both digital timing and foot pedal control.

The 8000 series uses 100% silicon-free syringes, pistons, and disposable needles.

Intelligent Dispensing Systems, Inc., 16400 Ventura Boulevard, Suite 315, Encino, CA 91436. Tel: 818-907-9494; Fax: 818-907-9495.