Product Showcase

  1. ProSys MTS Tube Filler
    3/12/2010
    The ProSys MTS series is a state of the art, semi -automatic squeeze tube filling and closing system. Designed for short run and low volume tube filling applications. Produces up to 25 finished tubes per minute.
  2. ProSys Model HP 55A Drum Press
    1/8/2010
    The ProSys Model HP 55A is for feeding product to any filler from 55-gallon drums. The hydraulic power supply uses an integrated, air-cooled radiator. Product changeovers are greatly improved with the ProSys hose liner system.
  3. ProTrac 140/220 Fill Station
    12/9/2009
    The ProTrac 140 and 220’s SERVO Driven Fill Station provides push button control and setup recall for all fill station adjustments.
  4. 100 Gallon Sanitary Mixing Vessel
    3/30/2009
    Special 100 gallon capacity sanitary mix vessel constructed of type 316 stainless steel. This unit is mounted on a portable cart with a scale. Included is a tilt back air operated propeller agitator, vacuum design, a 100 psi jacket and a sanitary 180 grit finish.
  5. V-Blenders
    3/30/2009

    V-Blenders designs are most often used for the intimate dry blending of free flowing solids. The solids being blended in these units can vary in bulk density and in percentage of the total mixture. Materials being blended are constantly being split and intermixed as the shell rotates.

  6. Skid Mounted Static Mixing Systems
    3/5/2009

    Charles Ross & Son Company, the leader in specialty mixing and dispersion equipment, is now offering complete skid mounted static mixing systems

  7. Double Cone Blenders
    2/25/2009

    Double Cone Blenders are most often used for the intimate dry blending of free flowing solids. The solids being blended in these units can vary in bulk density and in percentage of the total mixture. Materials being blended are constantly being intermixed as the Double Cone rotates. Normal cycle times are typically in the range of 10 minutes, however they can be less depending on the difficulty of blending.

  8. Double Cone Blender
    2/24/2009
    Double Cone Blenders are most often used for the intimate dry blending of free flowing solids. The solids being blended in these units can vary in bulk density and in percentage of the total mixture. Materials being blended are constantly being intermixed as the Double Cone rotates. Normal cycle times are typically in the range of 10 minutes, however they can be less depending on the difficulty of blending. Ross Double Cone Blenders are in stock in 5, 10 and 15 cu.ft. capacity. A full range of sizes from 1/2 to 80 cu. ft working capacity is available. Each is constructed of type 316-stainless steel and is internally polished to a 240 grit sanitary finish. The exterior is polished to an easily cleaned 150-grit finish. All Ross Double Cone Blenders are supplied with Intensifier bars to permit delumping and deagglomeration as needed. Discharge is accomplished through a manually operated Butterfly valve. The valve is positioned 24” from the floor when in the bottom position. All units are provided with appropriate safety railings and appropriately interlocked safety interlocks. Stop-Start and E-Stop Pushbuttons are included with all blenders.
  9. Hydrogen Sulfide Monitor: Jerome® 860
    1/30/2009
    The Jerome 860 hydrogen sulfide monitor is designed to continually monitor and record hydrogen sulfide concentrations in remote locations. The instrument provides automatic, unattended, long-term monitoring of hydrogen sulfide gases in contained or hard to reach areas. The compact, battery powered monitor is portable, water resistant and intrinsically safe.
  10. Moisture/Solids Analyzer: Computrac® MAX® 4000
    1/5/2009
    The Computrac® MAX® 4000 moisture/solids analyzer provides the same reliability and ruggedness as the MAX® 2000XL, but with 25% faster throughput!