Downloads

51. Application Note: Curling/Gelling Materials 4/22/2011

    The Cure Mode algorithm was developed in response to customer concerns that (1) their gel timers did not provide them with any viscosity or rheological data, and (2) they could not afford expensive rheometers that would monitor gelation or "curing" of materials such as epoxies, for example.

52. Technical Brief: Hybrid Planetary Mixers Produce High Viscosity Mixtures With Ultra-Fine Dispersion Quality 4/15/2011

    Hybrid planetary mixers are utilized for creating fine dispersions in viscous mixtures, typically within the viscosity range of 100,000 to 2 million cP. By Charles Ross and Son Company

53. Hybrid Planetary Mixers Produce High Viscosity Mixtures With Ultra-Fine Dispersion Quality 4/15/2011

    Hybrid planetary mixers are utilized for creating fine dispersions in viscous mixtures, typically within the viscosity range of 100,000 to 2 million cP. By Charles Ross and Son Company

54. Technical Brief: Mixing High Solids Formulations 4/15/2011

    Mixer selection for high solids formulations depends on viscosity rather than percent solids. Regardless of solids concentration, low-viscosity mixtures can be prepared in single-shaft rotor/stator mixers or high-speed dispersers. By Charles Ross and Son Company

55. Tech Brief: Select A Powder Induction Mixer That Can Serve Multiple Mix Tanks Of Virtually Any Size 4/5/2011

    An inline rotor/stator mixer equipped for powder induction offers flexibility, capability, and portability to serve multiple mix vessels of virtually any size. Its straightforward operation and convenience further maximize equipment utility while simplifying material handling. By Charles Ross and Son Company

56. Select A Powder Induction Mixer That Can Serve Multiple Mix Tanks Of Virtually Any Size 4/5/2011

    An inline rotor/stator mixer equipped for powder induction offers flexibility, capability and portability to serve multiple mix vessels of virtually any size. By Charles Ross and Son Company

57. Tech Brief: Ribbon Blenders Are Ideal For Coating And Mixing Processes 4/5/2011

    In certain industries, mixing of solid materials is required not only to blend different components, but also to intimately coat a minor or trace ingredient onto the rest of the other particles in the batch. To maximize the functionality of the minor ingredient, individual particles of the bulk material have to be evenly coated. By Charles Ross and Son Company

58. Ribbon Blenders Are Ideal For Coating And Mixing Processes 4/5/2011

    Solid-solid mixing sometimes involves powders that need to be uniformly coated with smaller particles of a different component. By Charles Ross and Son Company

59. Tech Brief: Electronic Variable Speed Promotes Processing Flexibility In Ribbon Blenders - From Soft Start To Discharge 4/5/2011

    Over the years, many ribbon blenders were built without any provision for starting at slow speed. Unfortunately, a dead load start presents many disadvantages, all of which increase costs. The buyer must choose between using an over-sized drive train that is capable of delivering the peak horsepower needed to get the batch moving or a lower torque drive train that is appropriate for powering the blender once it is running but overloaded when starting. By Charles Ross and Son Company

60. Electronic Variable Speed Promotes Processing Flexibility In Ribbon Blenders - From Soft Start To Discharge 4/5/2011

    Variable frequency drives enable ‘soft start’ of ribbon blenders, an essential feature that protects the system against a spike in start-up torque. By Charles Ross and Son Company